最新公告:
当前位置:首页-新闻动态>>公司公告>>不干胶材料是如何制造出来的你知道吗?

不干胶材料是如何制造出来的你知道吗?

来源:http://www.shengfengyinshua.com/ 日期:2019-10-28 发布人:admin   不干胶材料制造的主要工序是涂布、复合,其它为辅助工序,依据生产厂家的条件和产品的特性采用不同类型的涂布设备。总体来说涂布机有两品种型,一种为分体式,一种为串联式。分体式是涂硅和涂胶复合在同一机器上两次完成,或在各自的机器上完成;串联式涂布为各工序在一台机器上一次完成。
  The main process of self-adhesive material manufacturing is coating and compounding. Other processes are auxiliary processes. Different types of coating equipment are used according to the conditions of the manufacturer and the characteristics of the products. Generally speaking, there are two types of coater, one is split type, the other is series type. Split type is to apply silicon and glue on the same machine twice, or on their own machines; series coating is to complete each process on a machine once.
  a.经涂塑或有压光层的底纸在设备A上涂布硅油,或者是先背印然后涂硅,涂硅后的底纸经烘箱枯燥或固化。经涂硅枯燥后的底纸复卷成卷,完成底纸加工工序。
不干胶防伪标签印刷制作
  A. the base paper coated with plastic or calendered layer shall be coated with silicone oil on equipment a, or it shall be printed on the back first and then coated with silicon, and the base paper coated with silicon shall be dried or solidified in the oven. After being coated with silicon, the base paper is rewound into a roll to complete the base paper processing process.
  b.涂胶和复合工序在设备B上完成。设备的一端安放底纸,另一端安放面纸。工艺流程为:一端底纸涂胶并经烘箱烘干,抵达复合工位;另一端为面纸经张力控制、导向纠偏安装后也抵达复合工位。在复合工位上底纸、面纸复兼并复卷成大卷。到此,完成不干胶材料制造的全部过程。
  B. glue application and compound process shall be completed on equipment B. The bottom paper is placed at one end of the device, and the surface paper is placed at the other end. The process flow is as follows: one end of the bottom paper is coated with glue and dried in the oven, and then it reaches the composite station; the other end is the surface paper, after the tension control and guide deviation correction installation, it also reaches the composite station. In the composite station, the bottom paper and the surface paper are combined and rewound into a large volume. To this end, complete the whole process of self-adhesive material manufacturing.
  不干胶
  Non drying adhesive
  a.一端底纸放卷后首先涂硅、烘干,然后进入背印和涂胶工位,经涂胶后的底纸进入烘箱烘干,抵达复合工位。
  A. after one end of the backing paper is unwinded, it is first coated with silicon and dried, and then it enters the back printing and gluing station. After gluing, the backing paper enters the oven for drying, and finally reaches the compounding station.
  b.另一端面纸放卷后首先经涂底层工位,经烘干后的底纸抵达电晕处置工位(用于薄膜材料,纸类材料可不用),电晕处置后的面料抵达复合工位。在复合工位底纸、面纸复兼并卷成大卷,完成不干胶材料的制造过程。
  B. after unwinding the other end of the face paper, it first passes through the bottom coating station, and the dried bottom paper arrives at the corona disposal station (for film materials, paper materials can not be used), and the fabric after corona disposal arrives at the composite station. In the composite station, the bottom paper and the surface paper are combined and rolled into a large volume to complete the manufacturing process of the adhesive material.
  以上是不干胶防伪标签印刷制作的相关内容介绍,想要了解更多内容,欢迎访问网站:http://www.shengfengyinshua.comThe above is the introduction of the production of self-adhesive anti-counterfeiting label printing. For more information, please visit the website: http://www.shengfengyinshua.com

上一篇:透明不干胶标签印刷厂家告诉您危险废物标签怎么制作?
下一篇:在没有品味过红酒的状况下,红酒不干胶标签来帮助!
联系我们