当前位置:首页-新闻中心>>公司公告>>不干胶标签贴标和存储的使用上应该注意什么?

不干胶标签贴标和存储的使用上应该注意什么?

来源:http://www.shengfengyinshua.com/ 日期:2020-06-08 发布人:admin 1、防止潮湿,保持干燥,在通风条件藏。
1. Prevent humidity, keep dry and store in ventilated condition.
2、防止日晒或高温热烤,在温度10--25度为宜,标签的存 放环境温度不宜过低。不干胶材料放置在室外或寒冷环境中,很容易 导致材料,尤其是胶水部分被冻伤。如果不经过适当的恢复,不干胶 的粘性和加工性能会因此而损失或丧失。
2. It is better to keep the label at 10-25 ℃ and the storage environment temperature should not be too low. When the self-adhesive material is placed outdoors or in cold environment, it is easy to cause frostbite of the material, especially the glue part. If not properly recovered, the adhesive and processing properties of the adhesive will be lost or lost.
贴标指南
Labeling Guide
1、压力:不干胶标签为压敏型标签,必须有足够的压力才能保证标签粘贴牢固,不起翘。贴标时还应注意贴标压力控制及被贴表面的清洁。一个合适的贴标压力,即可以保证排出标签与被贴表面间的空气。从而,标签贴得即牢固又平整。被贴表面的清洁也是保证标签的粘性和贴合后平整性的重要因素。手工贴标保证足够的贴覆压力。
1. Pressure: self adhesive label is pressure-sensitive label, which must have enough pressure to ensure that the label is firmly pasted and does not rise. When labeling, pay attention to the pressure control of labeling and the cleaning of the surface to be pasted. A suitable labeling pressure can ensure that the air between the label and the surface to be pasted is discharged. Thus, the label is firmly and smoothly pasted. The cleanness of the surface to be pasted is also an important factor to ensure the stickiness of the label and the flatness after the lamination. Manual labeling ensures enough pressure.
2、温度:不干胶标签贴标温度为10-15℃,低于此温度胶粘剂粘性降低,将无法正常贴标。
2. Temperature: the minimum labeling temperature of self-adhesive label is 10-15 ℃. If the adhesive viscosity is lower than this temperature, normal labeling will not be possible.
贴标注意事项
Labeling notes
1、根据生产定单型号、规格、数量选取正确的标签。
1. Select the right label according to the model, specification and quantity of the production order.
2、贴标前需清理包装物的灰尘,保持包装物的清洁。检查包装物有无破损、沙眼,防止标签浪费。
2. Before labeling, the dust of the package shall be cleaned to keep the package clean. Check the package for damage and trachoma to prevent label waste.
不干胶防伪标签印刷制作
3、贴标时贴正,贴牢固,标签与包装物间无气泡、褶皱。
3. The label shall be pasted correctly and firmly, and there shall be no bubble or fold between the label and the package.
4、被贴物体的表面温度,标签的表面温度、贴标车间的温度三 者均不能低于15℃;
4. The surface temperature of the object to be pasted, the surface temperature of the label and the temperature of the labeling workshop shall not be lower than 15 ℃;
5、在冬季,存放于室外(或温度低于10℃的空间)场所的被贴 物及标签被送到贴标车间后要放置一段时间,以使其达到环境温度,若被贴物表面因冷凝出现水雾,需待其干燥才可贴标,干燥后不影响贴标。在北方地区的冬季,要严格注意此项。
5. In winter, the stickers and labels stored outdoors (or in a space with a temperature lower than 10 ℃) shall be placed for a period of time after being sent to the labeling workshop to make them reach the ambient temperature. If water mist occurs on the surface of the stickers due to condensation, they shall not be labeled until they are dry, and the labeling will not be affected after drying. In winter in the north, this should be paid close attention to.
6、15℃为要求温度,温度越高,对贴标越有利。建议在20-25℃的温度下贴标。
6. 15 ℃ is the minimum required temperature, the higher the temperature is, the more favorable for labeling. It is recommended to label at a temperature of 20-25 ℃.
不干胶标签存储和贴标的一些注意事项,就是上面所介绍,可能不够全面,但希望能给大家带来一些帮助。不干胶标签存储和贴标过程中,一定要根据不干胶标签的特性,去寻找更适合不干胶标签的一些切合实际的方法,才能带来更好的效果。
Some precautions for storage and labeling of self-adhesive labels, as described above, may not be comprehensive, but I hope to bring some help to you. In the process of storage and labeling of self-adhesive label, we must find some practical methods that are more suitable for self-adhesive label according to the characteristics of self-adhesive label, so as to bring better effect.
感谢您的阅读,此文的文章来源:不干胶防伪标签印刷制作更多的内容和问题请点击:http://www.shengfengyinshua.com我们会继续努力的为您提供服务,感谢您的支持!
Thank you for your reading. For more information and questions, please click: http://www.shengfengyinshua.com We will continue to work hard to provide you with services, thank you for your support!

上一篇:不干胶标签的结构需要哪些材料生产?
下一篇:不干胶标签涂布中需要注意哪些?
联系我们