当前位置:首页-新闻中心>>公司公告>>对多层标签制作标准的改善

对多层标签制作标准的改善

来源:http://www.shengfengyinshua.com/ 日期:2020-07-13 发布人:shengfeng 当前,不干胶标签已经渗透到人们生活的方方面面。但是,传统不干胶标签存在的缺陷也日益凸显,例如,口红管、眼影管、指甲油瓶、香水瓶等瓶体细小的容器及其他有特殊要求的包装,由于粘贴标签的地方有限,不能全面记录产品信息,造成了标签的局限性。
At present, self-adhesive label has penetrated into all aspects of people's life. However, the defects of traditional self-adhesive labels are also increasingly prominent. For example, lipstick, eye shadow tube, nail polish bottle, perfume bottle and other small containers and other special requirements packaging, because of the limited place of stickers, can not fully record product information, resulting in the limitations of labels.
在这种情况下,多层标签应运而生,并广泛应用于化妆品、医药、化工及食品等领域。多层标签将信息印制到不同层的标签纸上,在底纸与各层标签纸上设置有硅油层与胶黏层,再将不同层的标签纸进行重叠、复合、模切。形成的多层标签因设置了硅油层可以分层揭开,并通过胶黏层粘贴于产品上。产品信息记录在各层标签纸之上,有效地拓展了标签信息记录空间,解决了传统不干胶标签信息记录空间不足的问题。
In this case, multi-layer label emerges as the times require, and is widely used in cosmetics, medicine, chemical and food fields. The multi-layer label prints the information to different layers of label paper. Silicon oil layer and adhesive layer are set on the bottom paper and each layer of label paper, and then the different layers of label paper are overlapped, compounded and die cut. Finally, the multi-layer label can be opened layer by layer because of the silicon oil layer, and is pasted on the product through the adhesive layer. The product information is recorded on each layer of label paper, which effectively expands the label information recording space and solves the problem of insufficient recording space of traditional self-adhesive label information.
多层标签虽然有其优势,但是,使用现有工艺生产的多层标签剥离时找不到剥离切入点,或者剥离切入点剥离困难,剥离后上层纸与下层纸彻底分离,一分为二,不能成为一个有效的整体标签,为标签的使用带来了诸多不便,存在着一定的不足。因此,对多层标签生产工艺进行改进,解决多层标签在以上使用过程中存在的缺陷,非常必要。
Although the multi-layer label has its advantages, the multi-layer label produced by the existing technology can not find the cut-off point, or it is difficult to peel off the cut-off point. After stripping, the upper paper and the lower paper are completely separated, and one is divided into two, which can not become an effective overall label, which brings a lot of inconvenience to the use of the label, and there are some shortcomings. Therefore, it is very necessary to improve the multi-layer label production process and solve the defects in the above use process.
剥离困难?增设小翼片
Is it difficult to separate? Add wing piece
针对以往多层标签初始剥离困难的问题,青岛三慧增设了一个方便剥离的小翼片。
In view of the difficulty in the initial stripping of multi-layer labels, Qingdao Sanhui has added a small wing to facilitate stripping.
首先,根据人们日常选择初始剥离点的习惯,将初始剥离点确定在标签右下端,即各层标签纸相连接一端的对面偏下方,如图所示,像字母“Q”的小尾巴。其次,这个小翼片在各层标签纸印刷、复合完毕后模切出来,消费者在剥离标签纸时会自然而然地捏住小翼片进行剥离。
First of all, according to people's daily habit of selecting the initial stripping point, the initial stripping point is determined at the lower right end of the label, that is, the opposite side of the end of each layer of label paper connected, as shown in the figure, like the small tail of the letter "Q". Secondly, the small wing is die-cut after each layer of label paper is printed and compounded. Consumers will naturally hold the small wing to peel off the label paper.
对多层标签工艺的精进
Improvement of multi-layer label technology
但是,因为小翼片是几层标签纸复合在一起的,捏住小翼片时几层标签纸会一起同底纸分离,仍然不能实现逐层剥离开。
不干胶防伪标签印刷
However, because the small wing is composed of several layers of label paper, when the small wing is pinched, several layers of label paper will be separated from the bottom paper together, and it is still unable to peel off layer by layer.
为解决“问题中的问题”,青岛三慧把更下层标签纸的小翼片在模切后去掉,如图中红色箭头所示,而次下层的小翼片仍旧保留。这样捏住小翼片进行剥离时,就可以方便地对更下层标签纸和次下层标签纸分别进行剥离了。对于两层以上的多层标签,该工艺需要从更下层标签纸开始呈阶梯式地不同程度地切断小翼片,从而达到使标签逐层剥离的目的。
In order to solve the "problem in the problem", Qingdao Sanhui removed the small wing of the bottom label paper after die cutting, as shown by the red arrow in the figure, while the small wing of the lower layer was still retained. In this way, it is convenient to peel off the bottom label paper and the second lower label paper by holding the small wing for stripping. For the multi-layer label with more than two layers, the process needs to cut off the small wings step by step from the bottom label paper, so as to achieve the purpose of stripping the label layer by layer.
避免整体分离?看如何层间处理
Avoid overall separation? How to deal with inter layer
多层不干胶标签包括一层底纸和至少一层的标签纸,所有标签纸的反面均为胶黏层,胶黏层亦可进行标签内容的印刷,标签纸的层数可根据具体产品内容来定。更下层标签纸反面的胶黏层与底纸相复合,使用标签时直接粘贴在产品上。
The multi-layer self-adhesive label includes a bottom paper and at least one layer of label paper. The reverse side of all label papers is adhesive layer. The adhesive layer can also print the label content. The number of layers of label paper can be determined according to the specific product content. The adhesive layer on the back of the bottom label paper is combined with the bottom paper, and the label is directly pasted on the product.
为解决标签整体分离的问题,更下层标签纸正面左端未印刷标签内容的部分,留出一小部分区域不设置硅油,其余区域设置硅油。次下层标签纸与更下层标签纸复合后,在设置硅油层的区域,两层标签纸可顺利地剥离,而未设置硅油层部分不能剥离。这样通过硅油加工工艺,将两层标签纸有效地连接在了一起,实现了多层标签可剥离查看而又不会整体分离的目的。
In order to solve the problem of label separation as a whole, a small part of the area without label content printed on the left side of the bottom label paper is not provided with silicone oil, and the rest areas are set with silicone oil. After the secondary layer label paper is combined with the bottom layer label paper, the two layers of label paper can be peeled off smoothly in the area with silicon oil layer, but the part without silicon oil layer cannot be peeled off. In this way, through the silicone oil processing technology, the two layers of label paper are effectively connected together, and the purpose of multi-layer label can be peeled off for inspection without overall separation.
关于不干胶防伪标签印刷http://www.shengfengyinshua.com就先介绍到这里了,相信大家在实际的工作中会用到相关知识,如果您有这方面的需要,欢迎前来选购。
On the printing of self adhesive anti counterfeiting label http://www.shengfengyinshua.com First of all, I believe that you will use the relevant knowledge in the actual work, if you have the need in this respect, welcome to buy.

上一篇:不干胶贴纸上的裂痕应该注意哪些?
下一篇:标签打印软件是如何进行不干胶防伪标签设计?
联系我们