当前位置:首页-新闻中心>>公司公告>>薄膜类不干胶标签材料使用特点

薄膜类不干胶标签材料使用特点

来源:http://www.shengfengyinshua.com/ 日期:2020-09-02 发布人:shengfeng 1PE
1PE
PE(聚乙烯)柔软性、耐挤压性好,抗拉伸性差,有白色和透明等颜色,能做金属化处理。由于PE有良好的柔软性,常被用在需要经常挤压且容易变形的瓶体上。但PE材料太软,需要通过增加厚度加大挺度,80-100ΜM的厚度更多见,往往用做大面积的贴标材料。
PE (polyethylene) has good softness, extrusion resistance, poor tensile and elongation. It has white and transparent colors and can be metallized. Because of its good softness, PE is often used in bottles which need to be extruded and easy to deform. However, PE material is too soft, so it is necessary to increase the stiffness by increasing the thickness. The thickness of 80-100 μ m is the most common, and it is often used as a large area labeling material.
2PP
2PP
PP(聚丙烯)用机器进行双向拉伸处理,也称为BOPP硬度高,抗拉伸性好,不透光性良好,耐久性优异,但耐温性一般,透明材料有优异的透明度。PP材料应用在表面很硬、不会被挤压的瓶体上。市场上用格拉辛底纸或PET底纸来配合PP面材,就是考虑到不同层次的透明度要求。
PP (polypropylene) is biaxially stretched by machine, also known as BOPP, which has high hardness, good tensile elongation, good opacity and excellent durability, but its temperature resistance is general, and transparent materials have excellent transparency. PP material is applied to the bottle with hard surface and will not be extruded. In the market, the use of grasin backing paper or pet backing paper to match PP surface material is to consider the transparency requirements of different levels.
3PET
3PET
透明不干胶标签印刷厂家
PET(聚酯)具有优异的耐高温性、耐久性和抗拉伸性,,耐化学腐蚀性好,挺度高,有多种颜色,能做金属化处理,透明材料的透明度优异。材料拉伸不变形,很难撕坏,在抖动时会发出金属摩擦的声音。在电器、电动以及机械设备上有广泛应用,能体现很好的质感和强度。
Pet (polyester) has excellent high temperature resistance, durability and tensile elongation, good chemical corrosion resistance, high stiffness, various colors, can be metallized, transparent material has excellent transparency. The material does not deform after stretching, and it is difficult to tear off. It will make metal friction sound when shaking. It is widely used in electrical, electric and mechanical equipment, which can reflect good texture and strength.
4PVC
4PVC
PVC(聚氯乙烯)有软质和硬质两种,耐久性、抗撕裂性、柔软性,耐化学腐蚀性能良好,在电子、机械及电池、户外贴上应用很多。但耐温性和抗拉伸性一般,受温度影响会出现一定程度的收缩。拉伸时容易撕坏。受的限制,目前在室内使用越来越少。
PVC (polyvinyl chloride) has two kinds of soft and hard. It has good durability, tear resistance, softness and chemical corrosion resistance. It is widely used in electronics, machinery, batteries and outdoor stickers. However, the temperature resistance and tensile elongation are general, and there will be a certain degree of shrinkage affected by temperature. It is easy to tear when stretched. Limited by environmental protection, indoor use is less and less.
5PP和PE的混合物
Mixture of 5pp and PE
PP和PE的混合物(聚烯烃)用机器进行单向拉伸处理,有较高的抗拉伸强度和抗撕裂度,不透光性低,材料柔软、耐挤压。材料在一个方向上可拉伸变形成一条直线,在另一个方向上表现很硬。此类材料集柔软性和挺度于一体,在机器方向上有很好的挺度,另一方向上有很好的柔软性,在贴标时出标顺畅,贴标后耐挤压性好。在眼镜护理液、日化产品上应用广泛。
The mixture of PP and PE (polyolefin) is treated by machine, which has high tensile strength and tear resistance, low light transmittance, soft material and extrusion resistance. The material can be stretched in one direction to form a straight line and hard in the other. This kind of material integrates softness and stiffness. It has good stiffness in the machine direction and good flexibility in the other direction. When labeling, the label can be issued smoothly and the extrusion resistance is good after labeling. It is widely used in eyeglass care solution and daily chemical products.
6合成纸
6 synthetic paper
合成纸属于PP材料的一种,纸张为亚光白色,经过双向拉伸处理,材质坚韧,耐挤压性较好。
Synthetic paper is a kind of PP material. The paper is Matt White. After biaxial tensile treatment, the material is tough and has good extrusion resistance.
相信看了本文的透明不干胶标签印刷厂家http://www.shengfengyinshua.com介绍后,对这方面也会有自己的一番认识,以后针对的等问题也能很好的解决。
I believe that read the transparent label printing manufacturers http://www.shengfengyinshua.com After the introduction, we will have our own understanding of this aspect and solve the problems in the future.

上一篇:三防不干胶热敏纸和单防条码热敏纸的对比
下一篇:怎么粘贴防伪标签合适?
联系我们