当前位置:首页-新闻中心>>企业动态>>在冬天怎么样使用不干胶的贴标?

在冬天怎么样使用不干胶的贴标?

来源:http://www.shengfengyinshua.com/ 日期:2019-01-24 发布人:admin 在冰冷的环境中,不干胶资料的粘性具有跟着温度下降而削弱弱的特性。往往客户反映胶水不粘以及飞标、掉标等问题均和温度有关。
In the cold environment, the stickiness of the adhesive material is weakened with the decrease of temperature. Often the customer reflects that the glue is not sticky and the problems of flying mark and dropping mark are all related to temperature.
以下各方面关于冬天运用不干胶的贴标注意事项:
The following points for attention in labeling the use of self-adhesive in winter:
1.标签的寄存环境温度不宜过低。不干胶资料放置在室外或冰冷环境中,很简单导致资料,尤其是胶水部分被冻伤°假如不经过恰当的康复,不干胶的粘性和加工功能会因此而丢失或损失。
1. Label storage environment temperature should not be too low. The stickiness and processing function of the adhesive will be lost or lost if it is not properly recovered.
2.贴标环境温度应到达产品要求o在满意贴标温度(1 0C-25*C)要求情况下正常贴标,24小时后贴有不干胶标签的产品便可以在运用温度规模内(一般-5"C-40*C)进行运用。任何一种不干胶资料都有-个相关的贴标温度,低于该温度,不干胶的胶水粘性发挥受到限制,将会导致标签贴不牢、起翘等问题。
2. The labeling ambient temperature should reach the product requirement o. Normally labeling should be carried out under the condition of satisfying the labeling temperature (10C-25*C). Products with dry glue labels can be used within the application temperature scale (generally - 5 "C-40*C) 24 hours later. Any kind of adhesive material has a related labeling temperature, below which, the glue stickiness of the adhesive is limited, which will lead to labeling problems such as improper sticking, warping and so on.
4.标签预置处理,在冰冷的区域这一点十分重要。假如因为运输、贮存条件不能满意要求,而导致标签本身温度较低,乃至冻伤时,虽然贴标环境温度满意要求,因为不能及时康复,不干胶粘性和加工功能同样会受影响。因此,在上述情况下,加工或贴标操作之前,应将标签资料预置在贴标环境中一段时间(24小时以 上),使标签资料本身的温度有所回升,从而粘性和加工功能得到康复。
4. Label presetting is very important in cold areas. If the temperature of label itself is low or even frostbite is caused by unsatisfactory transportation and storage conditions, the stickiness and processing function of adhesive will also be affected, although the labeling environment temperature is satisfied, because it can not recover in time. Therefore, in the above circumstances, before processing or labeling operation, the label data should be preset in the labeling environment for a period of time (more than 24 hours), so that the temperature of the label data itself can rise, thus the stickiness and processing function can be recovered.
5.在完成贴标后,不干胶标签资料的粘性一般需要一段时间(通 常为24小时)才干逐渐到达较高值。不宜将刚贴好标签的容器或产品马上放到温度差异较大的环境中去(即便该环境满意不干胶资料的运用温度规模)。否则,胶水粘性的发挥会受影响。并且,薄膜类标贴及容器会因温度改变而热胀冷缩,纸类标签则较易出现纸张纤维受潮或失水变形的现象。这些改变均不利于胶水发挥较佳的贴标功能。
5. After labeling, the stickiness of adhesive label data generally takes a period of time (usually 24 hours) to gradually reach the maximum value. It is not advisable to place the container or product that has just been labeled in an environment with large temperature difference (even if the environment is satisfied with the temperature scale of the application of non-sticking materials). Otherwise, the development of glue viscosity will be affected. In addition, film labels and containers will expand and shrink due to temperature changes, while paper labels are more prone to damp or dehydration deformation of paper fibers. These changes are not conducive to the glue to play the best labeling function.
6.贴标时还应注意贴标压力控制及被贴外表的清洁。一个适宜的贴标压力,即可以确保排出标签与锁贴外表间的空气。从而,标签贴得即结实又平坦。被贴外表的清洁也是确保标签的粘性和贴合后平坦性的重要因素。
6. Attention should also be paid to labeling pressure control and surface cleaning. An appropriate labeling pressure ensures that the air between the label and the outside of the lock is discharged. Thus, the label is sturdy and flat. Cleaning the surface of the label is also an important factor to ensure the stickiness and flatness of the label.
以上信息是我们不干胶防伪标签印刷整理发布希望对大家有所帮助我们的网站是:http://www.shengfengyinshua.com
The above information is that our self-adhesive anti-counterfeiting label printing and publishing hope to help you with our website is: http://www.shengfengyinshua.com!

上一篇:你知道什么是铜版纸不干胶标签吗?
下一篇:影响不干胶标签印刷制作的外观的因素是什么你知道吗?
联系我们