当前位置:首页-新闻中心>>企业动态>>对于标签的使用时的温度情况把握

对于标签的使用时的温度情况把握

来源:http://www.shengfengyinshua.com/ 日期:2020-05-27 发布人:admin 标签的温度有两个概念,一是贴标温度,二是使用温度,贴标温度是贴标的环境温度,需要一定的时间来达到标签与被贴物的融合,使用温度则是在标签与被贴物融合后能应用的温度范围,在笔者遇到的很多标签问题中,相当一部分是没有区分好这两个概念
There are two concepts of label temperature, one is label temperature, the other is use temperature. Label temperature is the environment temperature of label. It takes a certain time to achieve the integration of label and object. The use temperature is the temperature range that can be applied after the integration of label and object. In many label problems encountered by pen users, quite a part of the two concepts are not distinguished well
举例:某冰淇淋厂家需要在包装盒上贴标签,然后去冷藏室装上冰淇淋再送往配送,整个过程一气呵成!而且厂家为了防止标签起翘等不良现象,特意采用了使用温度能适合低温的标签。可惜在送往配送后,多数标签都起翘了!大家百思不得其解!如上所述,标签的使用温度往往是标签贴好24小时后甚至48小时后才能去适应的温度,因为胶水需要一定的时间去融入各种被贴物,而在这个初步贴上以及融入的过程中,其温度是有另外的要求的,即贴标的环境温度。为了改善这个现象,厂家在贴标后先放置在常温中,次日再去冷藏室使用,有效的解决了此类问题
For example: an ice cream manufacturer needs to label the packaging box, then load the ice cream in the refrigerator and send it to the distribution center. The whole process is completed in one breath! Moreover, in order to prevent the label from lifting and other undesirable phenomena, the manufacturer specially uses the label with the use temperature suitable for low temperature. Unfortunately, after being sent to the distribution center, most of the labels are cocked! You can't understand it! As mentioned above, the use temperature of the labels is often the temperature that can be adapted 24 hours or even 48 hours after the labels are pasted, because it takes a certain time for the glue to integrate into all kinds of stickers. In the process of initial pasting and integration, there are other requirements for the temperature, namely, pasting Target ambient temperature. In order to improve this phenomenon, the manufacturer first placed the label in the normal temperature, and then went to the refrigeration room for use the next day, which effectively solved this kind of problem
不干胶防伪标签印刷
随着客户的需求日益广泛,对标签的要求也越来越多,使用中遇到的问题也不断增加或者奇特!曾遇到一个比较特殊的例子,某产品在脱模后,含硅成分高的脱模剂并不能完全的被清洗掉,而是大面积的残留在产品上,厂家在贴标时曾反复多次的尝试各类标签与胶水,但都没有达到理想的效果。通过反复和厂家确认产品表面的成分后,推荐厂家使用硅胶的标签材料,才真正解决好了这个问题。
With the increasing demand of customers, more and more labels are required, and the problems encountered in the use are also increasing or strange! Once encountered a special example, after a product is demoulded, the demoulding agent with high silicon content can not be completely cleaned, but a large area of residue on the product, the manufacturer has repeatedly tried various labels and glues when labeling But none of them achieved the desired effect. After repeatedly confirming the composition of the product surface with the manufacturer, it is recommended that the manufacturer use the silica gel label material to solve this problem.
使用前的测试,可以避免很多问题;而对问题进行大胆的想象,却很可能会带来一系列的技术创新!记得在十余年前,国外有一种概念,希望对啤酒瓶上的标签进行水洗后取下来,从而有利于对瓶子的回收,但由于啤酒本身就多存放在冰冻或者潮湿的环境中,当时很多人并不认为这个想法能实现,但现在这样的材料却已经非常普遍的在市场中运用了
The test before use can avoid many problems; However, a bold imagination of the problem is likely to bring about a series of technological innovation! Remember that there was a concept abroad more than ten years ago, hoping to wash the label on the beer bottle and remove it, which is conducive to the recovery of the bottle. However, because the beer itself is stored in the frozen or humid environment, many people at that time did not think that this idea could be realized, but now In this kind of material, it has been widely used in the market
本文来自:不干胶防伪标签印刷更多的内容请点击:http://www.shengfengyinshua.com我们将会为您提问的问题提供一个满意的服务,欢迎您的来电!
This article comes from: self adhesive anti-counterfeiting label printing more content please click: http://www.shengfengyinshua.com We will provide a satisfactory service for your questions. Welcome to call!

上一篇:清洗不干胶的5个小妙招
下一篇:如何提高不干胶标签的印刷质量?
联系我们