当前位置:首页-新闻中心>>企业动态>>条码标签纸选购时应该注意什么?

条码标签纸选购时应该注意什么?

来源:http://www.shengfengyinshua.com/ 日期:2020-10-15 发布人:shengfeng 1、根据产品的黏贴表面材质不干胶标签都是黏贴式的。而用不干胶材料加工的标签可能被标贴在各种材料的表面,如玻璃、金属、硬纸板以及塑料等。而塑料又可进一步分为:聚氯乙烯、高密度聚乙烯。测试表明,不同的标贴表面对表现的影响很大。所以选择不干胶标签时一定要根据自己产品的黏贴表面来决定选择何种材质的不干胶标签。
1. According to the adhesive surface material of the product, the self-adhesive label is adhesive type. The label processed with self-adhesive materials may be labeled on the surface of various materials, such as glass, metal, cardboard and plastic. And plastics can be further divided into: PVC, HDPE. The test results show that different labeling surfaces have a great influence on the performance. Therefore, when choosing the self-adhesive label, it is necessary to decide which material to choose according to the adhesive surface of the product.
2、根据产品黏贴表面的形状标贴基材表面有平面和曲面之分,如果标贴表面具有一定的弧度(例如,直径小于三公分的药瓶表面)就可能需要面纸具有良好的适贴性或粘度较强的胶水。
2. According to the shape of the adhesive surface of the product, the surface of the labeling substrate can be divided into plane and curved surface. If the surface of the label has a certain radian (for example, the surface of a medicine bottle with a diameter less than 3cm), it may be necessary for the tissue paper to have good adhesiveness or glue with strong viscosity.
3、根据产品黏贴表面的洁净状况不干胶材料更适于表面清洁、干燥、油迹和灰尘的标贴基材,如果是其他类型的基材,请选择其他的标签纸。
激光标签制作厂家
3. According to the cleaning condition of the product adhesive surface, the self-adhesive material is most suitable for the labeling substrate with clean, dry, oil stains and dust. If it is other types of substrate, please choose other professional label paper.
4、环境状况贴标的环境及温度都会影响粘胶剂的特性,如多水或多油环境,不干胶粘度需要在冷、热、潮湿或室温条件下粘贴。不干胶标签是否暴露在以下的环境,是否用于户外、高温、潮湿或含有紫外线的光线之下,以及是否接近温度较高的汽车引擎等状况均需要考虑。因此需要根据不同的环境状况选择合适的标签纸。
4. Environmental conditions, labeling environment and temperature will affect the characteristics of the adhesive, such as water or oil environment, self-adhesive viscosity needs to be pasted in cold, hot, humid or room temperature conditions. Whether the self-adhesive label is exposed to the following environment, whether it is used outdoors, under high temperature, humidity or ultraviolet light, and whether it is close to the automobile engine with high temperature should be considered. Therefore, it is necessary to select appropriate label paper according to different environmental conditions.
5、根据标签粘胶剂的特性以粘胶剂的表现性能来看,总体可分为两类:性粘胶剂和可移除性粘胶剂。性较难移除,但粘贴性能强,可移除性粘胶剂便于移除,但粘贴性能不如性粘胶剂。
5. According to the characteristics of label adhesive and the performance of adhesive, it can be divided into two categories: permanent adhesive and removable adhesive. The permanent adhesive is difficult to remove, but the adhesive performance is strong. The removable adhesive is easy to remove, but the adhesive performance is not as good as the permanent adhesive.
6、印刷方式和加工方式在选择不同的印刷方式(如柔性版印刷、凸版印刷、胶印、热转移和激光打以及加工方式(如卷到卷、卷到单张、折叠式进纸方式、单张到单张)以后,在确定不干胶材料之前,应先在相同印刷,加工及贴标条件下测试。面纸的选择取决于印刷方式和更终客户需要。高质量的印品当然需要面纸光华,内在质量优异的不干胶材料,热转移印刷方式则要求选用表面平整光滑又耐污渍的特殊面纸。
6. After selecting different printing methods (such as flexographic printing, relief printing, offset printing, heat transfer and laser printing) and processing methods (such as roll to roll, roll to sheet, folding feed mode, sheet to sheet), the adhesive materials should be tested under the same printing, processing and labeling conditions before determining the adhesive materials. The choice of tissue depends on the printing method and the needs of the final customer. Of course, high-quality printing needs glossy tissue. The internal quality of self-adhesive materials is excellent. Heat transfer printing requires the selection of special paper with smooth surface and stain resistance.
7、储存时间不同的产品不同的商家对不干胶标签的储存时间是有区别的,有的要求长久,有的要求可能是暂时的,所以需要根据自己对不干胶标签本身的要求来决定和选择,以免浪费自己的财力。
7. Storage time is different for products with different storage time, and different businesses have different storage time for self-adhesive labels. Some requirements are long-term, and some requirements may be temporary. Therefore, it is necessary to decide and select according to their own requirements for self-adhesive labels, so as to avoid wasting their own financial resources.
8、渗胶溢胶情况软PVC和PET条码纸,常常会有增塑剂渗出也称为溢胶,选择PET和PVC条码纸时要特别注意,应选择水胶,热熔胶容易渗胶。
8. When choosing pet and PVC barcode paper, special attention should be paid to the selection of water glue. Hot melt adhesive is easy to seep.
9、条码纸尺寸当不确定条纸尺寸是否合适的时候,一定要注意进行实际试验,防止买回却用不了的情况。
9. Bar code paper size when you are not sure whether the size of the bar paper is appropriate, we must pay attention to the actual test to prevent the situation that the paper can not be used after being bought back.
10、贴标机试验在确定条码纸之前,一定要将条码纸置入自动贴标机中进行几次实际试验,检查贴标的流畅度以及其他状况。
10. Label machine test before determining the bar code paper, we must put the bar code paper into the automatic labeling machine for several actual tests to check the smoothness of labeling and other conditions.
上面的内容就是今天小编给大家介绍的内容了,我们真诚为您提供激光标签制作厂家服务,您的满意就是我们的责任,欢迎在网站下方留言:http://www.shengfengyinshua.com
The above content is the content introduced to you today. We sincerely provide laser label manufacturer service for you. Your satisfaction is our responsibility. Welcome to leave a message at the bottom of the website: http://www.shengfengyinshua.com

上一篇:标签覆膜有哪些方法?
下一篇:食品标签常识你一定要知道
联系我们