当前位置:首页-新闻中心>>企业动态>>不干胶标签印刷时应该注意哪些细节?

不干胶标签印刷时应该注意哪些细节?

来源:http://www.shengfengyinshua.com/ 日期:2020-12-30 发布人:shengfeng 不干胶底纹或底图色彩不要低于10%,以防止打印成品时无法出现。
The color of the self-adhesive shading or underlay should not be less than 10% to prevent it from appearing when printing the finished product.
不干胶一切输入或自绘的图形,其线框粗细不行小于是0.1mm,不然打印品会形成断线或无法出现的状况。
Self adhesive all input or self drawn graphics, the wireframe thickness should not be less than 0.1 mm, otherwise the print will form a broken line or unable to appear.
当渐层之物件置入图框精确剪裁,请将其转为点阵图,由于置入之图框渐层与其他物件群组后再做旋转,其渐层之方向并不会一起旋转。别的,任何渐层物件皆不行设定“边际宽度”,由于输出机的解说不一样,有时会形成渐层边际填色不足。
When a gradient object is inserted into a frame for accurate clipping, please convert it into a dot matrix. Because the gradient of the inserted frame is rotated after it is grouped with other objects, the gradient direction will not rotate together. In addition, it is not allowed to set the "margin width" for any gradients. Due to the different explanations of the output machine, sometimes the gradients are not filled enough.
双面双折手刺打印时请标明折线及正反面。
Please mark the fold line, front and back when printing with double-sided double fold hand prick.
山东透明不干胶标签印刷
不管手刺打印、卡片打印,不管单面打印、双面打印,不管人数多少或样式多少,一概置于同一页面,不要分页制造。
No matter how many people there are, no matter how many cards there are, no matter how many cards there are, no matter how many people there are, they should be placed on the same page.
稿件完结不需画十字线及裁切线,可用2个隐形的线框来充任制造尺度和出血线92x56mm,裁切后为90x54mm(即四边各保存1mm出血)。如有格外尺度需求,请在定单里及所上载的文档中格外阐明。
At the end of the manuscript, there is no need to draw cross lines and cut tangent lines. Two invisible wire frames can be used to make the size and bleeding line of 92x56mm and 90x54mm after cutting. If you have any special requirements, please specify them in the order and the uploaded documents.
1格外留意有任何图像、色块或线超出制造尺度时,请一概置入图框内。勿用白色色块讳饰,防止形成合版时之困惑。
Pay special attention to any image, color block or line beyond the manufacturing scale, please put it in the frame. Don't use white color block to avoid confusion when forming a combined version.
不干胶标签打印时,一定要把上面介绍的这些内容都很好的记住,只有我们对打印时的一些要求掌握的越多,才能让我们的不干胶标签打印出更好的效果。
When printing the self-adhesive label, we must remember the above contents well. Only when we master some requirements of printing, can we make our self-adhesive label print better.
充满历史性的品牌。弧形的瓶身设计,就连瓶身标签的一角也刻意加上了圆弧的圆润感,再仔细观察可以看到标签上压上了产地的地图,充分让产品与地域连结。竞价模式中,发布需求的印厂在半小时内可收到5份报价,报价详情中会显示每家三方印厂的优势和特色,印厂可以从优中选优,选择性价比的三方印厂进行生产,从而降低委外加工过程中的选择成本和印刷成本。
A brand full of history. The arc-shaped bottle body design, even a corner of the bottle body label also deliberately adds the round feeling of the arc. After careful observation, you can see that the map of origin is pressed on the label, which fully connects the product with the region. In the limited time bidding mode, the printing factory that publishes the demand can receive 5 quotations within half an hour. The quotation details will show the advantages and characteristics of each tripartite printing factory. The printing factory can choose the best from the best and choose the tripartite printing factory with the highest cost performance to produce, so as to reduce the selection cost and printing cost in the outsourcing process.

上一篇:不干胶标签储存要注意什么?
下一篇:不干胶标签印刷粘度的检测方法?
联系我们